path | app | description | ||
apps.Bombilla | AbstractMate | AbstractMate is a test application for Bombilla, the TinyOS communication-centric bytecode interpreter. | ||
apps.Ident | App | |||
apps.Blink | Blink | Blink is a basic application that toggles the leds on the mote on every clock interrupt. | ||
apps.BlinkTask | BlinkTask | BlinkTask is a basic application that toggles the leds on the mote one every timer firing. | ||
apps.CntToLeds | CntToLeds | This application is built by wiring the TimerC, IntToLeds and Counter components together. | ||
apps.CntToLedsAndRfm | CntToLedsAndRfm | This application blinks the LEDS as a binary counter and also send a radio packet sending the current value of the counter. | ||
apps.CntToRfm | CntToRfm | This app sends counter values out over the radio. | ||
apps.TestEEPROM.ByteSpeed | ETiming | |||
apps.TestEEPROM.PageSpeed | ETiming | |||
apps.GenericBase | GenericBase | |||
apps.HighFrequencySampling | HFS | |||
apps.MicaHWVerify | MicaHWVerify | @author Su Ping @author Intel Research Berkeley Lab | ||
apps.Oscilloscope | Oscilloscope | This configuration describes the Oscilloscope application, a simple TinyOS app that periodically takes sensor readings and sends a group of readings over the UART. | ||
apps.OscilloscopeRF | Oscilloscope | This configuration describes the Oscilloscope application, a simple TinyOS app that periodically takes sensor readings and sends a group of readings over the radio. | ||
apps.RfmToLeds | RfmToLeds | This application will receive and display the packet sent from the CntToRfmAndLeds Application. | ||
apps.SecureTOSBase | SecureTOSBase | @author Phil Buonadonna @author Chris Karlof | ||
apps.Sense | Sense | |||
apps.SenseLightToLog | SenseLightToLog | The SenseLightToLog app is used in Lesson 8 of the TinyOS tutorial and it implements the Sensing and StdControl interface. | ||
apps.SenseTask | SenseTask | Configuration for SenseTask application. | ||
apps.SenseToLeds | SenseToLeds | When the clock fires, this application reads the light sensor and displays the higher 3 bits of the ADC readings to LEDs. | ||
apps.SenseToRfm | SenseToRfm | When the clock fires, this application reads the light sensor and send the ADC reading in a packet over the radio. | ||
apps.SimpleCmd | SimpleCmd | |||
apps.Surge | Surge | |||
apps.TASKApp | TASKApp | @author Sam Madden @author David Gay | ||
apps.TOSBase | TOSBase | @author Phil Buonadonna | ||
apps.TransparentBase | TOSBase | @author Phil Buonadonna | ||
apps.TestEEPROM.Byte | TestByteEEPROM | This program is a simple test of ByteEEPROM, a component which provides a byte-level abstraction to the EEPROM. | ||
apps.TestEEPROM.EEPROM | TestEEPROM | This application serves as a test of off-chip EEPROM functionality. | ||
apps.TestEEPROM.Page | TestEEPROM | |||
apps.TestMatchbox.Remote | TestRemote | |||
apps.TestSnooze | TestSnooze | TestSnooze is a basic application that illustrates the use of the Snooze component to put the mote into a low power state for a user-defined period. | ||
apps.TestTinyAlloc | TestTinyAlloc | TestTinyAlloc tests the TinyAlloc dynamic memory allocator. |
||
apps.TestTinySec | TestTinySec | |||
apps.TestTinyViz | TestTinyViz | The TestTinyViz application simply sends random messages to demonstrate the debugging and visualization features of TinyViz. | ||
apps.TestUart | TestUart | |||
apps.TestMatchbox.Timing | Timing | |||
apps.TinyDBApp | TinyDBApp | @author Sam Madden |