#-*-Makefile-*- vim:syntax=make
# $Id: MakeHC08,v 1.2 2004/01/09 10:18:23 cssharp Exp $
# @author Cory Sharp <cssharp@eecs.berkeley.edu>

###
### Define these environment variables in your startup script, particular 
### to your installation: TELOSPATH, CWPATH, PEMICROPATH
###

ifndef TELOSPATH
TELOSPATH = c:/home/telos
endif

ifndef CWPATH
CWPATH = c:/apps/CodeWarrior
endif

ifndef PEMICROPATH
PEMICROPATH = c:/apps/pemicroHCS08
endif


###
### You probably won't have to change anything below here to get started
###

CHC08  = $(CWPATH)/prog/chc08.exe
LINKER = $(CWPATH)/prog/Linker.exe
BURNER = $(CWPATH)/prog/Burner.exe
START_OBJ = $(CWPATH)/lib/HC08c/lib/start08.o
ANSI_LIB = $(CWPATH)/lib/HC08c/lib/ansi.lib
TELOSLIB = $(TELOSPATH)/hc08/lib

LINKER_PRM = $(TELOSPATH)/hc08/lib/hcs08gb60.prm
BURNER_BBL = $(TELOSPATH)/hc08/lib/generic_s19.bbl
PEPROG = $(TELOSPATH)/hc08/bin/peprog

CHC08_OPTS := -Os -Oi=c65536 -Cu=i8 -F2 -Lasm $(CHC08_OPTS)
CFLAGS := $(CFLAGS) -I$(TELOSPATH)/tos/platform/hc08 -I$(TELOSPATH)/hc08/include 
PEPROG_OPTS = -cprog $(PEMICROPATH)/cprogHCS08.exe Interface=USBMULTILINK Port=USB1

ifndef FORCE_HC08
START_OBJ := $(START_OBJ:start08.o=start08s.o)
ANSI_LIB  := $(ANSI_LIB:ansi.lib=ansis.lib)
CHC08_OPTS := -Cs08 $(CHC08_OPTS)
endif

ifdef NESC
TELOS_EXE_DEPS =
else
TELOS_EXE_DEPS =  $(TELOSLIB)/hcs08gb60.o
endif


%.install: %.s19 FORCE
	$(PEPROG) -srec $< $(PEPROG_OPTS)

%.s19: %.exe
	BurnIn=$< BurnOut=$@ $(BURNER) -f $(BURNER_BBL)

%.exe: %.o $(TELOS_EXE_DEPS)
	DEFAULTDIR=. $(LINKER) -O./$@ $(addprefix -Add,$+ $(START_OBJ) $(ANSI_LIB)) $(LINKER_PRM)
	map=$(TELOSLIB)/$(basename $@).map && [ -f $$map ] && mv $$map ./

%.o: %.c
	$(CHC08) $(CHC08_OPTS) $(PFLAGS) $(CFLAGS) $<

clean: FORCE
	rm -f $(TELOSLIB)/hcs08gb60.o EDOUT err.log
	@a=`for a in *.c; do b=$${a%.c}; for c in $$b.o $$b.map $$b.exe $$b.s19; do [ -f $$c ] && echo -n "$$c "; done; done`; [ -n "$$a" ] && echo "rm -f $$a" && rm -f $$a; true

extra_clean: FORCE
	rm -f $(TELOSLIB)/hcs08gb60.o

.PRECIOUS: %.o %.exe %.s19
.PHONY: FORCE