Linux version 2.4.20-31.9smp (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP Tue Apr 13 17:40:10 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffe000 (usable) BIOS-e820: 000000003fffe000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 262142 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32766 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: POWEREDGE 8E APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Dell PowerEdge 1300 series board detected. Selecting SMP-method for reboots. Dell PowerEdge 1300 series board detected. Selecting BIOS-method for reboots. Kernel command line: ro root=LABEL=/ Initializing CPU#0 Detected 598.173 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1192.75 BogoMIPS Memory: 1026656k/1048568k available (1493k kernel code, 18332k reserved, 1099k data, 156k init, 131064k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Katmai) stepping 03 per-CPU timeslice cutoff: 1462.89 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1196.03 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated (2388.78 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-13, 2-14, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 39. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 0 0 0 0 0 1 1 39 02 0FF 0F 0 0 0 0 0 1 1 31 03 0FF 0F 0 0 0 0 0 1 1 41 04 0FF 0F 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 0FF 0F 0 0 0 0 0 1 1 51 07 0FF 0F 0 0 0 0 0 1 1 59 08 0FF 0F 0 0 0 0 0 1 1 61 09 0FF 0F 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 0FF 0F 0 0 0 0 0 1 1 71 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 0FF 0F 0 0 0 0 0 1 1 79 10 0FF 0F 1 1 0 1 0 1 1 81 11 0FF 0F 1 1 0 1 0 1 1 89 12 0FF 0F 1 1 0 1 0 1 1 91 13 0FF 0F 1 1 0 1 0 1 1 99 14 0FF 0F 1 1 0 1 0 1 1 A1 15 0FF 0F 1 1 0 1 0 1 1 A9 16 0FF 0F 1 1 0 1 0 1 1 B1 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 598.1521 MHz. ..... host bus clock speed is 99.6918 MHz. cpu: 0, clocks: 996918, slice: 332306 CPU0 cpu: 1, clocks: 996918, slice: 332306 CPU1 checking TSC synchronization across CPUs: passed. Starting migration thread for cpu 0 smp_num_cpus: 2. Starting migration thread for cpu 1 PCI: PCI BIOS revision 2.10 entry at 0xfc84e, last bus=3 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I13,P0) -> 17 PCI->APIC IRQ transform: (B0,I14,P0) -> 18 PCI->APIC IRQ transform: (B0,I17,P0) -> 20 PCI->APIC IRQ transform: (B2,I11,P0) -> 16 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ide-floppy driver 0.99.newide ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 295k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 megaraid: v1.18f (Release Date: Tue Dec 10 09:54:39 EST 2002) megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 13:func 1 scsi0 : Found a MegaRAID controller at 0xf8838000, IRQ: 17 megaraid: [3.13:1.43] detected 1 logical drives megaraid: channel[1] is raid. scsi0 : LSI Logic MegaRAID 3.13 254 commands 15 targs 4 chans 7 luns blk: queue f79e8e18, I/O limit 4095Mb (mask 0xffffffff) scsi0: scanning virtual channel 0 for logical drives. Vendor: MegaRAID Model: LD0 RAID5 25704R Rev: 3.13 Type: Direct-Access ANSI SCSI revision: 02 blk: queue f79e8c18, I/O limit 4095Mb (mask 0xffffffff) scsi0: scanning physical channel 0 for devices. Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 52641792 512-byte hdwr sectors (26953 MB) Partition check: sda: sda1 sda2 sda3 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs blk: queue c3615618, I/O limit 4095Mb (mask 0xffffffff) Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 156k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 18:00:38 Apr 13 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xcce0, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal Adding Swap: 2040244k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. IA-32 Microcode Update Driver: v1.11 microcode: CPU0 already at revision 14 (current=14) microcode: CPU1 already at revision 14 (current=14) microcode: freed 4096 bytes parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected ip_tables: (C) 2000-2002 Netfilter core team Intel(R) PRO/100 Network Driver - version 2.2.21-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. divert: allocating divert_blk for eth0 e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled ip_tables: (C) 2000-2002 Netfilter core team e100: eth0 NIC Link is Up 100 Mbps Full duplex ip_tables: (C) 2000-2002 Netfilter core team parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready ide-floppy driver 0.99.newide hdc: attached ide-cdrom driver. hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! UDP: short packet: 0.0.0.0:68 288/282 to 255.255.255.255:67 UDP: short packet: 0.0.0.0:68 288/282 to 255.255.255.255:67 UDP: short packet: 0.0.0.0:68 288/282 to 255.255.255.255:67 UDP: short packet: 0.0.0.0:68 288/282 to 255.255.255.255:67 cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! cdrom: This disc doesn't have any tracks I recognize! tcpdump uses obsolete (PF_INET,SOCK_PACKET) device eth0 entered promiscuous mode device eth0 left promiscuous mode